
Zebra · RFID antenna
Zebra AN610
The AN610 is a smaller slim line, ultra-low profile antenna that is suitable for use in indoor environments.
- SealingIP54 IP54 • Inside medical cabinets
Datasheet at Zebra Product page at Zebra
Runs Raptool WMS and other Raptool apps in the Raptool Client, with full access to the scanner, camera, RFID and printers, online and offline. Scanner apps
Specifications
RF performance
- Frequency range
- EU: 865–868 MHz; US: 902–928 MHz
- Gain
- 5.0 dBic
- Polarization
- Left-hand circular
- 3 dB beam width
- 80° in both planes
- Axial ratio
- Less than 2 dB
- VSWR (return loss)
- 1.4:1
- Front-to-back ratio
- 18 dB
- Maximum power
- 6 W
Physical characteristics
- Connector
- N-Type female
- Connector location
- Pigtail, side
- Mounting
- Flush mount (integrated mounting holes)
- Dimensions
- 275 x 214 x 12 mm (10.8 x 8.5 x 0.47 in.)
- Weight
- 0.6 kg (1.3 lbs)
- Casing / materials
- Aluminum with Kydex casing
Environment
- IP sealing
- IP54
- Operating temperature
- -20 to +55 °C (-4 to +131 °F)
- Storage temperature
- -30 to +65 °C (-22 to +149 °F)
- Humidity
- IEC-68-2-30 (-25 to +40 °C, 24-hour cycles of 90% RH)
- Vibration
- IEC-68-2-6 (10 to 150 Hz, 0.5 g, random vibration)
Compatibility
- Compatible readers
- Zebra FX9600, Zebra FX7500 fixed RFID readers
Lifecycle
- Status basis
- Listed on Zebra RFID reader antennas page and in the Zebra UHF RFID antennas brochure (06/2025).
Send a request
Get a quote for the AN610
Tell us where you are and what you need.
Raptool does NOT sell hardware. We are a pure software company. The devices are sold by our hardware partners around the world. Your request goes straight to a partner in your country, and they send you the quote.








