
Zebra · RFID tag
Zebra ZBR2200 RFID Inlay
Next-generation Zebra-branded RFID Inlay
Datasheet at Zebra Product page at Zebra
Raptool apps in the Raptool Client read and write this tag on a UHF RFID handheld, sled or fixed reader, online and offline. RFID solutions
Overview
Zebra ZBR2200 RFID Inlay is a passive UHF RFID inlay for labels. Read range: Up to 19m (frequency and substrate dependent).
Specifications
Tag
- Tag type
- Inlay / label
- Memory
- EPC 128 bit; User N/A; TID 96 bit factory locked (48 bit unique)
- Frequency
- ETSI (865-868 MHz); FCC (902-928 MHz)
- Protocol
- EPC Gen2v2
- Surfaces
- Air, Cardboard, Fiberglass, Glass, PTFE, Polyacetyl, PVC, Rubber (theoretical read range table)
Technical Information
- Chip
- Impinj M830 with G2X features
- EPC memory
- 128 bit
- User memory
- N/A
- TID
- 96 bit factory locked (48 bit unique)
- Read sensitivity
- -25.5dBm
- Write sensitivity
- -20dBm
- RFID standards
- EPC Gen2v2
- Read range
- Up to 19m (frequency and substrate dependent)
Theoretical Read Range
- Read range on Air (ETSI / FCC)
- 15 / 19
- Read range on Cardboard (ETSI / FCC)
- 18 / 14
- Read range on Fiberglass (ETSI / FCC)
- 13 / 16
- Read range on Glass (ETSI / FCC)
- 11 / 11
- Read range on PTFE (ETSI / FCC)
- 18 / 15
- Read range on Polyacetyl (ETSI / FCC)
- 10 / 13
- Read range on PVC (ETSI / FCC)
- 13 / 19
- Read range on Rubber (ETSI / FCC)
- 11 / 11
Product Performance and Suitability
- Operating Temperature
- -40°C / +85°C
- Storage Temperature
- -55°C / +125°C
Testing and Compliance
- Zebra pre-testing
- All inlays certified by Zebra have been pre-tested with Zebra printers and readers.
Material Testing in End Application
- Disclaimer
- The information contained in this document is to be used for guidance only and is not intended for use in setting specifications. All purchasers of Zebra products shall be solely responsible for independently determining if the product conforms to all requirements of their unique application.
Warranty
- Warranty
- Supplies are warranted against defects in workmanship and materials for a period of 1 (one) year from the date of shipment.
Surfaces: Air, Cardboard, Fiberglass, Glass, PTFE, Polyacetyl, PVC, Rubber (theoretical read range table)
Lifecycle
- Sales status
- Current
- Status basis
- Listed on Zebra RFID Labels and Tags page; no lifecycle statement found.
Send a request
Get a quote for the ZBR2200 RFID Inlay
Tell us where you are and what you need.
Raptool does NOT sell hardware. We are a pure software company. The devices are sold by our hardware partners around the world. Your request goes straight to a partner in your country, and they send you the quote.


